ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 73 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 63
Operation |
Chapter 6
If this is the first time you turn the fans on during the ongoing UV disinfection cycle, the
pop-up window shown in Figure 52 will appear, reminding you that the fans will
continue to run in reduced flow mode after the UV disinfection cycle is complete.
Figure 52 Reduced Flow Mode Alert during UV Disinfection Cycle
The “Fan” button will change its appearance, displaying a gray border and a small
blue circle labeled “1/2” to indicate that the fans are running in reduced flow mode
(see Figure 53).
Figure 53 “Fan” Button in Off Mode vs UV Disinfection Mode
2. Tap the “OK” button or the “X” icon in the top right corner to close the window, or
wait for the window to close automatically after 10 seconds.
Proceed as follows to stop the fans while a UV disinfection cycle is running:
1. Tap the “Fan” button on the Control panel to stop the fans.
The “Fan” button will change its appearance, returning to its “off-state” image (see
Figure 54).
Figure 54 “Fan” Button in UV Disinfection Mode vs Off State
2. Tap the “OK” button or the “X” icon in the top right corner to close the window, or
wait for the window to close automatically after 10 seconds.
The fans will continue to
run in reduced flow mode
after the UV disinfection
cycle has been completed.
Fans
OK