ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 143 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 133
Maintenance |
Chapter 10
Exchanging SmartPorts
1. Before replacing the SmartPorts, open the front window. Doing so will produce an
alarm to indicate that there is a potentially unsafe operating condition.
2. Before replacing the SmartPorts, disinfect the workspace, front window, as well as
the inner and outer compartment walls.
3. First remove the inner grommet of the SmartPort in the workspace inwards from the
side panel opening.
4. Disinfect the grommet in the workspace and disinfect the inner compartment walls.
5. Insert new inner grommet in the side panel opening from the inside.
6. Then remove the outer grommet of the SmartPort in the workspace inwards from the
side panel opening.
7. Place the removed grommet in the workspace and disinfect.
8. Disinfect the outer compartment walls.
9. Insert new outer grommet in the side panel opening from the outside.
10. Safely discard used disinfected grommets.
Retrofitting and Repairs
External communication systems, e.g. failure report systems or components for supplying
media such as gas solenoid valves can be retrofitted and integrated into the device control.
Contamination!
There is a risk of contamination for users and the product itself. In order to
prevent contaminated particles escaping from the workspace, the unit must be
switched on in order to exchange the SmartPorts.
The SmartPorts are removed inwards into the workspace. Prior to replacement,
all work in the workspace must be finished.
Repairs
All retrofitting and repair work are interferences with the safety system of the
unit. Particularly modifications to the filter system and resulting changes of the
airflow may impair personal and material protection. Such work must be carried
out only by authorized service personnel.