ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 81 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 71
Operation |
Chapter 6
The “Status Good” screens display the following information:

First screen:

Total Operating Hours including last time the cabinet was run

UV light total operating hours, last cycle, and install date

Second screen:

Filter running time, estimated time left, and install date

In-Cabinet power receptacles: GFI Status (Ready or Tripped; North American
market version only)

Air speed: Inflow and Downflow
The two screens can be navigated by swiping left or right or tapping the small left/right
chevron icons. Two dots signify the number of screens available in this section and
indicate which screen you are currently viewing: the dot for the active screen is always
solid, while the hidden screen appears in outline shape.
Viewing UV Light Bulb and HEPA Filter Lifetime
Proceed as follows to display the remaining useful service life of the UV light bulb and
HEPA filter:
1. Tap the “Status Good” icon in the Info & Health Status Area on top of the Main
Screen.
The “Status Good” screen shown in Figure 65 appears, displaying the first suite of
status data.
Figure 65 “Status Good” Screen #1: Operating Hours, UV and Filter
2. If you have just changed the UV light bulb, tap the “Reset” button below the UV
display area.