ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 35 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 25
Unit Description |
Chapter 4
Device Interfaces
Figure 10 Supply Interfaces
The standard equipment includes the outlets [9] for internal power supply as well as the
SmartPort and openings [8] on both sides for routing of cables and hoses. All other supply
connections are available as options and may also be retrofitted.
Power supply connection: The connection to the power supply system is achieved
through a cable with grounding plug [2].
Contact: At the top side an USB interface [3] for Service is installed. Two fuse holders for
5A miniature fuses are located at the top rear of the cabinet:
[4] for L-Phase,
[5] for N-Neutral.
Internal power supply: According to the model size there are electrical outlets at the left
or/and right side (5A) [9] located on the rear wall.
Feed throughs: There are two sealed feed throughs [8] on each side. These may be used
for installation of media valves [7]. On delivery they are sealed with plastic stoppers.