ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 98 / 173

| Operation
88
|
50155215 Herasafe 2030i / Maxisafe 2030i
Chapter 6
Doing so will open up the “Edit AutoStart” screen shown in Figure 83 below. By
default, the
“Edit AutoStart” screen comes up with all four checkboxes already
selected, as shown in the top image in Figure 83.
Figure 83 “Programs” Screen: “Edit AutoStart” Screen
3. Tap to select or deselect the option checkboxes as required:

“Open window” will automatically open the window to the working position when
the “AutoStart” button
is pressed.

“Fan on” turns on the fans when the “AutoStart” button is pressed.

“Light on” turns on the sample chamber illumination when the “AutoStart”
button
is pressed.

“Receptacle on” applies electrical power to the power outlets in the sample
chamber when the “AutoStart” button
is pressed.
If you have made any changes, the “Save” button appears at the bottom of the
screen, as shown in the bottom image in Figure 83.
4. When you are done choosing AutoStart options, tap the “Save” button.
5. To commit the changes, tap the “OK” button in the pop-up window that appears (see
“Saving Changes” on page 95).
You will be returned to the “Settings” screen.
Thermo Fisher BSC
11:42 AM | 08/10/2018
Edit AutoStart
Open window
Fan on
Light on
Receptacle on
Save
Thermo Fisher BSC
11:42 AM | 08/10/2018
Edit AutoStart
Open window
Fan on
Light on
Receptacle on
Save