ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 100 / 173

| Operation
90
|
50155215 Herasafe 2030i / Maxisafe 2030i
Chapter 6

“Close window” will automatically close the window.

“Light off” turns off the sample chamber illumination when the “AutoStop”
button is pressed.

“Receptacle off” shuts off electrical power to the power outlets in the sample
chamber when the “AutoStop” button is pressed.

“UV on” starts the UV disinfection cycle when the “AutoStop” button is
pressed.
The “UV on” setting has additional parameters. You may set:

Time to run UV in hours (1-24 hours) and minutes (00, 15, 30, 45 minutes).
You may change the hours by tapping in the hour field and entering a number
from 1 to 24 in the calculator style keypad. You may change the minutes by
selecting any of these four options from a dropdown list: 00, 15, 30, 45.

You may also want to keep the fans running after the UV cycle is complete
by checking the
“Leave fan on” option explained further above. Default is
unchecked.
If you have made any changes, the “Save” button appears at the bottom of the screen.
5. When you are done choosing AutoStop options, tap the “Save” button (bottom image
in Figure 84.
6. To commit the changes, tap the “OK” button in the pop-up window that appears (see
“Saving Changes” on page 95).
You will be returned to the “Settings” screen.
NOTE If the window is set to close as part of AutoStop, you must press and
hold the “AutoStop” button
while the window is closing. This is a safety
feature.