ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 57 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 47
Operation |
Chapter 6
The following examples show different combinations of status indicator boxes for major
operational states.
Examples for windows with different operational states are shown below.
Control Panel (Region R2B)
The Control Panel in Screen Region R2B contains a complete set of controls for operating
the functions of the biological safety cabinet. The inventory of buttons varies with the
number of options built into the unit, as can be seen in Figure 29 and Figure 30.
The Control Panel is visible at all times below the Main Screen.
Figure 29 shows the control panel for a biological safety cabinet equipped with all options,
including a motorized window, sample chamber illumination, sample chamber fans, gas
supply and a power receptacle in the sample chamber.
Figure 29 Control Panel for fully equipped Unit
All green circles with checkmark: unit is ready.
All yellow timers: unit is not ready, but running up
to operational state.
All red circles with cross: window and airflow val-
ues are too low.
All red circles with cross: window and airflow val-
ues are too high.
All gray circles with dash: no activity because the
fans are off.