ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 65 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 55
Operation |
Chapter 6
Moving the Front Window
The movement of the front window is controlled by depressing the auxiliary rocker switch
control element with the corresponding arrow symbol.
Proceed as follows to raise the window:
1. Press the control element [1/Figure 41].
When the front window reaches the working position, the movement stops
automatically. If the movement starts above the working position, the front window
stops at the maximal opening position.
2. To stop the upward movement, release the control element.
3. To lower the window, keep the control element depressed [2/Figure 41].
4. To stop the downward movement, release the control element.
When the front window reaches its working position, the movement stops
automatically, the audible alarm signal is switched off, and the green “Health Status
Good” icon
appears in the Info & Health Status Area at the top of the “Display
Settings” screen.
When the front window does not reach the working position, the “Health Status
Alarm” icon
appears in the Info & Health Status Area at the top of the display
screen, along with a scrolling alarm description. For details on how to handle alarms,
please refer to the section “Silencing and Handling Alarms” on page 67.
The audible alarm signal is switched off when the front window is completely closed.
Moving the Front Window to the Working Position
Proceed as follows to move the front window up to the working position:
1. Tap the “Open window” button on the Control panel to raise the window from the
closed to the working position.
Crushing hazard
During movement of the front window do not try to access the inner chamber.
Crushing hazard
During movement of the front window do not try to access the inner chamber.