ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 92 / 173

| Operation
82
|
50155215 Herasafe 2030i / Maxisafe 2030i
Chapter 6
Activating / Deactivating Sleep Mode
Proceed as follows to activate/deactivate Sleep Mode (see “Sleep Mode” on page 53):
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Display Settings” button on the “Settings” screen.
3. Tap the “Sleep Mode” dropdown list on the “Display Settings” screen.
The dropdown list is expanded and displays its options, as shown in Figure 76 below.
Figure 76 “Sleep Mode” Dropdown Menu
4. Choose either “On” or “Off” for activating or deactivating the Sleep Mode.
If you have made any changes, the “Save” button appears at the bottom of the screen.
5. When you are done choosing the Sleep Mode option, tap the “Save” button.
6. To commit the changes, tap the “OK” button in the pop-up window that appears (see
“Saving Changes” on page 95).
7. You will be returned to the “Display Settings” screen.
Setting Units of Measurement
The units of measurement for airflow can be chosen directly on the main “Display
Settings” screen shown in Figure 71. A dropdown list lets you chose between:

metric units: m/s (meters per second), cmh (cubic meters per hour)

imperial units: fpm (feet per minute), cfm (cubic feet per minute)
Proceed as follows to switch units of measurement:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Display Settings” button on the “Settings” screen.
3. Tap the “Units” dropdown list on the “Display Settings” screen.
The dropdown list is expanded and displays its options, as shown in Figure 77 below.
Figure 77 “Units” Dropdown Menu
4. Choose either “m/s, cmh” for metric units or “fpm, cfm” for imperial units (default is metric).
If you have made any changes, the “Save” button appears at the bottom of the screen.
5. When you are done choosing the units of measurement, tap the “Save” button.
Sleep Mode
On
Off
Units
m/s, cmh
fpm, cfm