Thermal Dynamics ULTRA-CUT 200 XT, Operating Manual

Page: 100 / 228

ULTRA-CUT 200 XT
4-24 OPERATION Manual 0-5304
DMC Status Code Key
Group 1 - DMC
Code Message Cause/Remedy
1-1 Plasma Disabled Enable Plasma; Defective DMC Power Supply (E-Stop relay)
1-2 24 VDC fault Check /replace DMC power supply fuse (F2); Replace DMC Power Supply; Replace DMC
control PCB
1-3 5 VDC fault Check /replace DMC power supply; Replace DMC control PCB
1-4 No gas process selected Select and send process from TSC 3000 or CNC;
1-5 DMC is locked Process loading, wait until finished
1-6 Gas not Purged DPC fault prevented purge from occuring, see DPC fault status
Group 2 - DPC Communication Port *
2-1 DPC Acknowledge error Check DMC to DPC fiber optic cable and connections; Dirty or defective fiber-optic;DPC
power supply, fuse or Control PCB. DMC Control PCB
2-2 DPC Bus off error Check DMC to DPC fiber optic cable and connections; Dirty or defective fiber-optic;DPC
power supply, fuse or Control PCB. DMC Control PCB.
2-3 Reserved No information available; Contact customer service
Group 3 - CCM Communication Port *
3-1 CCM Acknowledge error Check DMC to CCM fiber optic cable and connections; Dirty or defective fiber-optic;
Replace DMC Control PCB; Replace CCM.
3-2 CCM Bus off error Check DMC to CCM fiber optic cable and connections; Dirty or defective fiber-optic;
Replace DMC Control PCB; Replace CCM.
3-3 Reserved No information available; Contact customer service
Group 4 - Gas Controller Status and Protocal Errors
4-1 CCM Connection loss Loss of communication with either DPC or DMC; check for dirty or defective fiber optic
to either DPC or CCM; See DPC and CCM status codes
4-2 CCM Timeout Loss of communication with either DPC or DMC, check for dirty or defective fiber-optic
to either DPC or CCM. See DPC and CCM status codes.
4-3 DPC Timeout Loss of communication with DPC, check for dirty or defective fiber-optic to DPC. See
DPC status code.
4-4 DPC error Loss of communication with DPC, check for dirty or defective fiber-optic to DPC. See
DPC status code.
4-5 Reserved No information available; Contact customer service
4-6 Reserved No information available; Contact customer service