Texas Instruments Titanium TI-89, User Manual

Page: 362 / 977

Sequence Graphing 359
Using a Sequence to Generate a Table
Previous sections described how to graph a sequence. You can also use a sequence to
generate a table. Refer to
Tables
for detailed information.
Example: Fibonacci Sequence
In a Fibonacci sequence, the first two terms are 1 and 1. Each succeeding term is the
sum of the two immediately preceding terms.
1. On the Y= Editor (
8 #
), define the
sequence and set the initial values as
shown.
2. Set table parameters (
8 &
) to:
tblStart = 1
@ tbl = 1
Independent = AUTO
You must enter {1,1},
although {1 1} is
shown in the
sequence list.
This item is dimmed
if you are not using
TIME axes.