TELELIFT 3713 SX
SCHEDULED MAINTENANCE INSPECTIONS
8
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
Model
Serial number
Date
Hour meter
Machine owner
Inspected by
Inspector signature
Inspector title
Inspector company
Instructions:
- Make copies of this page to use for each
inspection.
- Select the appropriate checklist(s) for the
type of inspection to be performed.
Every 10 hours: A
Every 50 hours: A+B
Every 250 hours: A+B+C
Every 500 hours: A+B+C+D
Every 1000 hours: A+B+C+D+E
Every 2000 hours: A+B+C+D+E+F
At 6000 hours: G
- Place a check in the appropriate box
after each inspection procedure is
completed.
- Use the maintenance tables in this
section and the step-by-step procedures
in section 4 to learn how to perform
these inspection.
- If any inspection receives an “N”, tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the “R” box.
Legend:
Y = yes, acceptable
N = no, remove from service
R = repaired.
Table E
Y N R
Every 1000 working hours:
E-1
Safety element of engine air
filter.
E-
Oil in the front and rear
differential gears and in the
power divider.
E-
Oil in the wheel reduction gears.
E-4
Hydraulic oil.
E-5
Change the hydraulic oil
filter cartridge of the service
circuits.
Table F
Y N R
Every 2000 working hours:
F-1
Change the engine coolant.
Table G
Y N R
At 6000 working hours:
G-1
Check the structure for damage,
in particular check welded
points and pins.
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...
