TELELIFT 3713 SX
SAFETY
1
5
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
1.-1
PERSONAL PROTECTIVE EQUIPMENT
During work, but especially when maintaining or repairing
the machine, operators must wear suitable protective
clothing and equipment:
•
Overalls or any other comfortable garments.
Operators should wear neither clothes with large
sleeves nor objects that can get stuck in moving parts
of the machine
•
Protective helmet when working under or in the
vicinity of suspended load
•
Protective gloves
•
Working shoes
• Breathing set (or dust mask)
• Ear-protectors or equivalent equipment
• Goggles or facial screen.
Use only type-approved protective equipment in
good condition.
1.4
SAFETY PRECAUTIONS
Read and understand the following safety instructions
before servicing the machine.
The following list contains safety rules which must
absolutely be obeyed to prevent accidents and
injuries.
1.4-1
WORKING AREA
•
Make sure the area all around the machine is safe.
Always be aware of potential risks.
•
During work, keep the working area in order. Never
leave objects scattered: they could hinder the
machine movements and represent a danger for
personnel.
1.4-
PRECAUTIONS DURING WORK
•
Do not walk or stop under raised loads or machine
parts supported by hydraulic cylinders or ropes
only.
•
Keep the machine handholds and access steps
always clean from oil, grease or dirt to prevent falls
or slips.
•
When entering/leaving the cab or other raised parts,
always face the machine; never turn the back.
•
When carrying out operations at hazardous heights
(
over 3 meters from the ground
), always use type-
approved safety belts or fall preventing devices.
•
Do not enter/leave the machine when it is running.
•
Before servicing the engine, let its parts cool down.
•
Do not leave the driving place when the machine is
running.
•
Neither stop nor carry out interventions under or
between the machine wheels when engine is running.
When maintenance in this area is needed, stop the
engine, engage the parking brake and chock the
wheels to prevent accidental movements.
•
Do not carry out maintenance or repair works without
a sufficient lighting.
•
When using the machine lights, the beam should be
oriented in order not to blind the personnel at work.
•
Before applying voltage to electric cables or
components, ensure they are properly connected
and efficient.
•
Do not carry out interventions on electric components
with voltage over 48V.
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...
