TELELIFT 3713 SX
TROUBLESHOOTING
5
6
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
Problem
Cause
Solution
No shifting between first and second
mechanical gear and vice versa
The boom doesn’t move
Check the micro-switches and replace
if necessary.
C h e c k t h e f u s e a n d r e p l a c e i f
necessary.
Check the board and replace if
necessary.
C h e c k t h e f u s e a n d r e p l a c e i f
necessary.
Check the button and replace if
necessary.
Check the sensor and replace if
necessary.
Check the relay and replace if
necessary.
Check the relay and replace if
necessary.
Check and replace if necessary.
Check the line continuity and repair if
necessary.
Check the position; change the selector
if damaged.
C h e c k t h e f u s e a n d r e p l a c e i f
necessary.
Check the operation of the button on the
control lever; replace if necessary
Check the efficiency of the solenoid and
replace if necessary.
Check the line continuity and repair if
necessary.
Outrigger micro-switches damaged.
10A fuse
F18
interrupted.
Relays board damaged.
10A fuse
F14
interrupted.
M e c h a n i c a l g e a r b o x b u t t o n
S 1 4
damaged.
Gearbox sensor
S5
damaged.
Relay
K5
interrupted.
Stopped machine relay
K4
interrupted.
Gearbox valve solenoids damaged.
Electric connecting lines.
Road/Jobsite selector on "Road" or
damaged.
10A fuse
F19
interrupted.
"Dead man" button damaged.
"Dead man" solenoid of the main valve
damaged
Electric connecting lines.
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...