TELELIFT 3713 SX
SCHEDULED MAINTENANCE INSPECTIONS
5
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
TABLE B
Within the first 50 working hours:
B-1
Change the oil for the first time.
Every 50 working hours or weekly:
B-
Check the tension of the alternator belt.
B-
Check the tyre inflation.
B-4
Check the tightening of the wheel nuts.
B-5
Check the tightening of the cardan shaft screws.
B-6
Clean the radiator fins.
TABLE C
Every 250 working hours or monthly:
C-1
Change the engine oil and relevant filter.
C-
Check the oil level in the front and rear differential gears and in the power divider.
C-
Check the oil level in the four wheel reduction gears.
C-4
Check the main filtering element of the engine air filter. Replace, if necessary.
C-5
Check the clamping of the cableheads to the battery terminals.
C-6
Check the air suction hose between engine and filter.
C-7
Check the cylinder chromium-plated rods.
C-8
Check the hydraulic lines are not worn because of rubbing against the frame or other mechanical
components.
C-9
Check the electric cables do not rub against the frame or other mechanical components.
C-10
Check the wear of the sliding pads of the boom sections.
C-11
Adjust the play of the sliding pads of the boom sections.
C-1
Remove any grease from the boom, then re-grease the sliding parts of the boom sections.
C-1
Check the level of the battery electrolyte.
C-14
Check the efficiency of the block valves.
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...
