Terex Telelift 3713 SX, Service Manual

Page: 155 / 212

TELELIFT 3713 SX
TROUBLESHOOTING
5
7
Document 57.4402.9200 - 1 st Edition 10/2006
INDEX
Problem Cause Solution
10A fuse F18 interrupted.
Outrigger micro-switches damaged.
Electric line connecting the micro-switches
to the DLE.
Socket X5 on DLE defective.
DLE display damaged.
10A fuse F5 interrupted.
Road/Jobsite selector S damaged.
Steer mode selector S damaged.
Spools Y0 - Y1 of the crab or four-wheel
steering selection solenoid damaged.
Electric connecting lines.
10A fuses F10 or 15A F1 interrupted.
Relay K5 interrupted.
Horn button SX11 on speed selector
damaged.
Horn H0 damaged.
Electric connecting lines.
7.5A fuse F11 interrupted.
Beacon X101 damaged.
The B6 system doesn’t change
scale when the machine is on wheels
or stabilised
No steering mode selction (two-
wheels, four-wheels, crab)
The horn doesn’t work
The beacon doesn’t work
C h e c k t h e f u s e a n d r e p l a c e i f
necessary.
Check the micro-switches and replace
if necessary.
Check the line continuity and repair if
necessary.
Check the pins of the signal inputs; if
damaged, replace the socket.
Change the DLE.
C h e c k t h e f u s e a n d r e p l a c e i f
necessary.
Check the selector and replace if
necessary.
Check the selector and replace if
necessary.
Check the spools and replace if
necessary.
Check the line continuity and repair if
necessary.
Check the fuses and replace if
necessary.
Check the relay and replace if
necessary.
Check the button and replace if
necessary.
Check the horn and replace if
necessary.
Check the line continuity and repair if
necessary.
C h e c k t h e f u s e a n d r e p l a c e i f
necessary.
Check the beacon and replace if
necessary.
Courtesy of Crane.Market