TELELIFT 3713 SX
TECHNICAL SPECIFICATIONS
57
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
Choose the folder where to save the setting and save the file with a name showing the serial number of the machine
(e.g. T3713 SX sn 10578).
Press the Save button.
If you have chosen to upload a setting previously saved in memory, select the “Carica” (Load) command from the
File menu. The following window will be displayed:
Choose the setting file you want to upload on the machine and press “Apri” (Open).
Save the setting as explained below:
DLE
• If you want to save the setting, contact the TEREXLIFT Service Centre to get more information and be registered
as an authorised user of the system.
• To gain access to the parameters and variables, no password is needed. All you have to do is connecting the DLE
display with the power cord supplied by TEREXLIFT (code 07.0736.0014) and proceed as explained below.
• Connect the DLE connecting cable to the electrical system of the machine - see Pict. 1.
• Connect the PC power cord to the DLE and the computer - see Pict. 2 – 3 – 4.
• Turn the ignition key of the machine to position I “board ON” and launch the Winscope program (see Pict. 5). If
this is the very first time you use the system, follow the instructions described from the first page of this document.
If you want to upload or download the setting from/to the machine DLE, you need a password which must be
asked to TEREXLIFT (to avoid any tampering with the system).
TEREXLIFT has also a database with all the values of the settings saved ordered by serial numbers which can
be provided at any time for comparson purposes.
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...