TELELIFT 3713 SX
SCHEDULED MAINTENANCE INSPECTIONS
4
4
4
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
4. TABLE A PROCEDURES
A-1 CHECK THE OIL LEVEL OF REDUCTION
GEARS, DIFFERENTIAL GEARS AND
POWER DIVIDER
To check the oil level within the wheel
reduction
gears
:
-
Stop the machine on a level ground and ensure the
parking brake is engaged and plug
A
finds on the
horizontal axis.
-
Clean the plug all around, then remove it and check
if oil is level with the hole.
-
If necessary, add new oil through hole
A
until it is
level.
- Refit the plug.
Place a container of suitable size under the plug.
To check the oil level in the front and rear
differential
gears
:
-
Stop the machine on a level ground and engage the
parking brake.
-
Loosen level plug
A
and check if oil is level with the
hole.
-
If necessary, top-up through hole
B
until oil comes
out from hole
A
.
- Refit and tighten plugs
A
and
B
.
Place a container of suitable size under the plug.
A
A
B
A
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...
