TELELIFT 3713 SX
SCHEDULED MAINTENANCE INSPECTIONS
5
4
5
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
E-4 CHANGE THE HYDRAULIC OIL
To change the hydraulic oil:
-
Stop the machine on a level ground and make sure
the parking brake is engaged.
-
Release the pressure from the hydraulic circuit.
-
Place a container of suitable size under the drain
plug, placed in the lower part of the reservoir, and
collect any oil leaks.
- Remove the drain plug and allow oil to flow out into
the container.
-
Remove the inspection cover
E
of tank.
-
Carefully wash the tank with Diesel oil and blow a jet
of compressed air.
- Refit the drain plug and the inspection cover
E
.
-
Add new oil of the type recommended through hole
D
until it is level with
C
.
Recommended oil:
- SHELL TELLUS T (temperatures below -10° C)
- SHELL TELLUS T46 (temperatures from -15°C to +45°C)
- SHELL TELLUS T68 (temperatures above +0° C)
The handling and disposing of used oils can be
ruled by local or national regulations. Address to
authorised centres.
C
D
E
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...
