TELELIFT 3713 SX
SCHEDULED MAINTENANCE INSPECTIONS
14
4
14
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
A-1 GREASE ALL JOINTS OF THE BOOM,
THE REAR AXLE SHAFT JOINT, THE
TRANSMISSION SHAFTS, THE FRONT
AND REAR AXLES AND ANY EQUIPMENT
OF THE MACHINE
Before injecting grease into the greasers, thoroughly
clean them to avoid that mud, dust or other matters
can mix with the lubricant and reduce or annihilate
the lubrication effect.
Remove any old grease with a degreaser from the
telescopes before smearing them with new grease.
Regularly grease the machine to grant it efficient conditions
and a long life.
By means of a pump, inject grease into the special
greasers.
As the fresh grease comes out, stop the operation.
The greasing points are shown in the following figures:
-
the symbol
represents the points to be greased
by a pump
-
the symbol
represents the points to be greased
by a brush.
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...