4
TELELIFT 3713 SX
SCHEDULED MAINTENANCE INSPECTIONS
4
4
Document 57.4402.9200 - 1
st
Edition 10/2006
INDEX
4.6 TABLE D PROCEDURES
D-1 VISUALLY CHECK THE SMOKE QUANTITY
E VA C U AT E D F R O M T H E E N G I N E
EXHAUST
To check the quantity of smoke evacuated from the engine
exhaust, proceed as follows:
-
Start the engine of the machine.
-
Wait for a few minutes so the engine can warm up
correctly.
-
Visually check that the amount of smoke coming
out of the exhaust is normal; repeat the check while
accelerating the engine.
Do this check outdoors or use an adequate smoke
extraction system.
In case of excess smoke, strictly obey the instructions
provided in the relevant Use and maintenance
manual enclosed with the technical literature of the
machine.
D- CHECK THE TIGHTENING OF THE ENGINE
FIXING SCREWS
Every 6 months, check that the screws fixing the engine
to the machine chassis are tight.
For this operation, use a torque wrench and tighten the
screws to a torque of
146 Nm
.
Summary of Contents for Telelift 3713 SX
Page 4: ...Courtesy of Crane Market...
