Teledyne ACCQPrep HP125, Installation And Operation Manual

Page: 67 / 142

ACCQPrep HP125
Section 5 PeakTrak
5-3
5.2.1 File The File menu lists the following commands:
New – Select the N
EW
command to open a new method file.
PeakTrak will open the M
AIN
window using the default program
settings for the default configured column size.
Open – Choose this command to open a M
ETHOD
F
ILE
(.pmtd) or
a R
UN
F
ILE
(.run) stored on the system’s internal hard drive.
Manage Files – Choose this command to open a window from
which you can archive or delete method and run files from the
current directory. You can archive files by connecting a USB
Flash drive and selecting the Copy or Move files to flash drive
option.
• To remove a file from the internal hard drive, highlight
the file or enter the filename and click the D
ELETE
button.
• To remove multiple files, you can drag to highlight
multiple files, or click the D
ELETE BY
A
GE
button. Then
specify the age limit in months and click OK.
Note
Use the M
OVE
and D
ELETE
options with caution as the files
cannot be recovered from the internal hard drive once the
action is complete.
Set Data Path – This opens the S
ET
D
ATA
P
ATH
window. Use
this window to specify the default storage folders for users. These
folders contain multiple M
ETHOD FILE
and R
UN
F
ILE
resources
created by system users.
Save Method – Choose this menu command to save the settings
of the current method file to the system’s internal storage if the
file is already named. If not already named, you will be prompted
to give the method a name and it will be saved.
Note
D
EFAULT
M
ETHODS
are an exception and cannot be overwritten
by the S
AVE
M
ETHOD
command. If a D
EFAULT
M
ETHOD
is open
and you attempt to save any modifications to that method, the
F
ILES
window appears so you can rename the method file. This
preserves the default method. The D
EFAULT
M
ETHOD
must be
edited in the Prep HPLC tab.
Save Method As – From this window you can rename the
current method and save it on the system’s internal hard
drive.
Save Run As PDF – Choose this command to save the
displayed run on a remote computer’s hard drive or a USB
Flash storage device connected to the system. When
selecting this menu command from the touch screen, the
system saves the file on the USB storage device. The default
file name will be the same as the R
UN
file, except with a
“PDF” file name extension. PeakTrak displays a file