Teledyne ACCQPrep HP125, Installation And Operation Manual

Page: 31 / 142

ACCQPrep HP125
Section 2 Installation
2-15
Figure 2-23 Diagram of the AutoSampler and ACCQPrep USB connections ( See Appendix A,
Figure A-2 for a larger diagram )
13. Connect the long USB cable (provided) from the USB-A
port on the back of the ACCQ Prep to the USB-B port on the
lower portion of the back panel on the AutoSampler Mod-
ule (Figure 2-23). See Appendix A, Figure A-2 for a larger
diagram.
14. The short USB cable connecting the USB-B port on the top
portion of the back panel of the Autosampler Module to the
USB-A port on the lower portion of the back panel of the
Autosampler Module should already be pre-installed. If
not, make connection as seen in Figure 2-23.
Auto
Sampler
Power
External
Detector
USB
To
Auto
Sampler
Waste
Level
Sense
B
IN
A
IN
A1
A1 A2 A3
B1 B2 B3
A2
B1
B2
B3
B4
A3
A4
Waste
Drain
Solvent Level Sensing
Solvent Inlet
Circuit Breaker
Main
Power