Teledyne ACCQPrep HP125, Installation And Operation Manual

Page: 25 / 142

ACCQPrep HP125
Section 2 Installation
2-9
Figure 2-13 Turn the valve to the Prime position
• If the solvent select option is not installed, the system
will immediately prime both solvent lines.
• If the solvent select option is installed, a dialog box
opens when the valve is switched to the P
RIME
position.
The dialog box allows you to select which of the A
solvents and B solvents will be primed.
• If you have not already assigned names to the A and B
solvents, they can be named at this time using the drop
downs. If the name you want isn’t listed, it can be added
in the C
ONFIGURATION
screen. This action can be
completed at a later time.
3. Once priming is complete, a new screen will appear direct-
ing you to turn the valve from the P
RIME
position to the
R
UN
position.
Note
The system will prime both pumps simultaneously. There
is no method to prime A and B individually.
2.3 Installing the Manual
Injection Port
Manual sample injection can be performed with the system even
when equipped with an AutoInjector or AutoSampler.
If no AutoInjector or AutoSampler is installed, a luer injection
port (209900002) is included in the accessory package. To install,
place the fitting into the injection valve and tighten the nut
snugly (Figure 2-14).
Figure 2-14 ACCQPrep with Manual Injection Luer Port installed