FIRMWARE UPGRADE PROCEDURE
165
6.
The display will show F-00
on the top and 0000 for the
Password for F-00.
7.
Use the current knob to set the
Password for the F-00 setting. The
Password is
“
5 0 0 4
”
.
Current
8.
Press the Voltage knob to enter the
Special Mode. SF- 1 will be
displayed when successful.
Voltage
X = the display
can be anything
9.
Rotate the voltage knob to change
the SF setting to SF- 6.
Voltage
10.
The display will show SF- 6
on the top.
11.
Use the current knob to set the
value for SF- 6. The value is
“
2
”
.
Current
Summary of Contents for Keithley 2260B Series
Page 14: ...2260B Series User Manual 10 Considerations 33 Grounding 36 ...
Page 43: ...OPERATION 39 Remove Test Sequence 99 Test Sequence Error Messages 100 ...
Page 52: ...2260B Series User Manual 48 Removal Reverse the procedure to remove the terminal covers ...
Page 111: ...CONFIGURATION 107 Note Power On and Calibration settings can only be set during power up ...