2260B Series User Manual
56
Reset to Factory Default Settings
Background
The F-88 configuration setting allows the 2260B
to be reset back to the factory default settings.
See page 173 for the default factory settings.
Steps
8.
Press the Function key. The
Function key will light up.
9.
The display should show F-
01 on the top and the
configuration setting for
F-01 on the bottom.
10.
Rotate the Voltage knob to change
the F setting to F-88 (Factory Set
Value).
Voltage
11.
Use the Current knob to set the
F-88 setting to 1 (Return to factory
settings).
Currnet
12.
Press the Voltage knob to confirm.
ConF will be displayed when
successful.
Voltage
13.
Press the Function key again to
exit. The function key light will
turn off.
Summary of Contents for Keithley 2260B Series
Page 14: ...2260B Series User Manual 10 Considerations 33 Grounding 36 ...
Page 43: ...OPERATION 39 Remove Test Sequence 99 Test Sequence Error Messages 100 ...
Page 52: ...2260B Series User Manual 48 Removal Reverse the procedure to remove the terminal covers ...
Page 111: ...CONFIGURATION 107 Note Power On and Calibration settings can only be set during power up ...