2260B Series User Manual
50
Output Connector
Pinout
-V
-S
N.C.
+S
+V
-V: -V terminals (x3)
-S: -Sense terminal
NC: Not connected
+S: +Sense terminal
+V: +V terminals
(x3)
Wiring the
Connector Plug
c
Tighten
Loosen
a
b
a.
Unscrew the
appropriate terminal
anticlockwise to
release the
receptacle.
b.
Insert a wire that has
had at least ~7mm
stripped from the
insulation.
c.
Tighten the
receptacle by
screwing clockwise.
Steps
1.
Turn the power switch off.
2.
Remove the output terminal cover.
Page 53
3.
Choose a suitable wire gauge for
the load cables.
Page 44
4.
Strip ~7mm from one end of each load cable.
5.
Connect the positive load cable to one of the
+V pins and the negative cable to one of the -V
pins.
Summary of Contents for Keithley 2260B Series
Page 14: ...2260B Series User Manual 10 Considerations 33 Grounding 36 ...
Page 43: ...OPERATION 39 Remove Test Sequence 99 Test Sequence Error Messages 100 ...
Page 52: ...2260B Series User Manual 48 Removal Reverse the procedure to remove the terminal covers ...
Page 111: ...CONFIGURATION 107 Note Power On and Calibration settings can only be set during power up ...