ANALOG CONTROL
127
2.
Set the F-90 power on
configuration setting to 1 (CV
control
–
Ext voltage).
Page 120
Be sure to cycle the power after the power on
configuration has been set.
3.
Press the Function key and confirm
the new configuration settings (F-
90=1).
4.
Press the Output key. The voltage
can now be controlled with the
External voltage.
Note
The input impedance for external voltage control is
10k
Ω
.
Use a stable voltage supply for the external voltage
control.
Note
CV and CC Slew Rate Priority are disabled for V-I
mode (F-03) when using external voltage control.
See the normal function settings on page 108.
CAUTION
Ensure no more than 10.5 volts are input into the
external voltage input.
Ensure the voltage polarity is correct when
connecting the external voltage.
Summary of Contents for Keithley 2260B Series
Page 14: ...2260B Series User Manual 10 Considerations 33 Grounding 36 ...
Page 43: ...OPERATION 39 Remove Test Sequence 99 Test Sequence Error Messages 100 ...
Page 52: ...2260B Series User Manual 48 Removal Reverse the procedure to remove the terminal covers ...
Page 111: ...CONFIGURATION 107 Note Power On and Calibration settings can only be set during power up ...