OPERATION
69
Display Modes
The 2260B power supplies allow you to view the output in three
different modes: voltage and current, voltage and power or current
and power.
Steps
11.
Press the PWR/DSPL key. The
PWR DSPL key lights up.
12.
The display changes to voltage and power
(V/W).
13.
To switch between displaying A/W and V/W,
simply press the corresponding Voltage or
Current knob.
For example: when in A/W mode, press the
Voltage knob to display V/W. Conversely
when in V/W mode, press the Current knob to
display A/W.
Voltage
Current
When V/W is displayed, the Voltage knob can
still be used to change the voltage level.
When A/W is displayed, the Current knob can
still be used to change the current level.
Exit
Press the PWR/DSPL key again to
return to normal display mode.
The PWR DSPL light will turn off.
V
W
W
A
Summary of Contents for Keithley 2260B Series
Page 14: ...2260B Series User Manual 10 Considerations 33 Grounding 36 ...
Page 43: ...OPERATION 39 Remove Test Sequence 99 Test Sequence Error Messages 100 ...
Page 52: ...2260B Series User Manual 48 Removal Reverse the procedure to remove the terminal covers ...
Page 111: ...CONFIGURATION 107 Note Power On and Calibration settings can only be set during power up ...
