FIRMWARE UPGRADE PROCEDURE
159
Firmware Update
Background
The firmware can be upgraded using the USB A
port on the front panel.
Note
Ensure the load is not connected.
Ensure the output is off.
1.
Insert a USB Flash Drive into the USB port on
the front panel of the Keithley 2260B.
Uncompress this zipped file to the root
directory (USB\:). The root directory needs to
contain the
keithley
folder.
2.
Press the Function key. The
function key will light up.
3.
The display will show F-01
on the top and the
configuration setting for
F-01 on the bottom.
4.
Rotate the voltage knob to change
the F setting to F-00.
Voltage
5.
The display will show F-00
on the top and the 0000 for
the Password for F-00.
Summary of Contents for Keithley 2260B Series
Page 14: ...2260B Series User Manual 10 Considerations 33 Grounding 36 ...
Page 43: ...OPERATION 39 Remove Test Sequence 99 Test Sequence Error Messages 100 ...
Page 52: ...2260B Series User Manual 48 Removal Reverse the procedure to remove the terminal covers ...
Page 111: ...CONFIGURATION 107 Note Power On and Calibration settings can only be set during power up ...