Tektronix DSA8300, Programmer'S Manual

Page: 43 / 455

Command Groups
Command Description
MEASUrement:MEAS<x>:ALL? Returns all measurement statistics values for
the measurement speci
fi ed by x
MEASUrement:MEAS<x>:EYEWindow Sets or returns the percent of interval
between two eye crossings centered on the
middle of the region
MEASUrement:MEAS<x>:GATing:STATE Sets or returns the gating state (on or off) for
the measurement speci
fi ed by x
MEASUrement:MEAS<x>:JITter Sets or returns the jitter-level crossing for
measurement
MEASUrement:MEAS<x>:MAXimum? Returns measurement statistics maximum
value for measurement <x>
MEASUrement:MEAS<x>:MEAN? Returns measurement statistics mean value
for measurement <x>
MEASUrement:MEAS<x>:MINimum? Returns measurement statistics minimum
value for measurement <x>
MEASUrement:MEAS<x>:NOISe Sets or returns whether noise is measured
on the high or low level of the signal
MEASUrement:MEAS<x>:REFLevel<x>? Returns all reference level <x> settings for
measurement slot <x>
MEASUrement:MEAS<x>:REFLevel<x>:
ABSolute:HIGH Sets or returns the top reference level in
absolute waveform units
MEASUrement:MEAS<x>:REFLevel<x>:
ABSolute:LOW Sets or returns the low reference level in
absolute waveform units
MEASUrement:MEAS<x>:REFLevel<x>:
ABSolute:MID Sets or returns the mid reference level in
absolute waveform units
MEASUrement:MEAS<x>:REFLevel<x>:
METHod Sets or returns the method to calculate
reference levels, either as a % of the high-low
range or in absolute vertical units
MEASUrement:MEAS<x>:REFLevel<x>:
RELative:HIGH Sets or returns the high reference level as a
% of the high-low range
MEASUrement:MEAS<x>:REFLevel<x>:
RELative:LOW Sets or returns the low reference level as a
% of the high-low range
MEASUrement:MEAS<x>:REFLevel<x>:
RELative:MID Sets or returns the mid reference level as a
% of the high-low range
MEASUrement:MEAS<x>:SETDefault Sets all measurement values to the
instrument default settings
MEASUrement:MEAS<x>:SOUrce<x>:
EDGE? :EDGE? Returns all edge settings for the
speci
fi ed measurement
MEASUrement:MEAS<x>:SOUrce<x>:
EDGE:DIRection Sets or returns the direction (forward or
backward) that the instrument uses to look
for the rising or falling edge
MEASUrement:MEAS<x>:SOUrce<x>:
EDGE:SLOPe Sets or returns the slope of the edges used
in delay time measurements
DSA8300 Programmer Manual 2-27