Tektronix DSA8300, Programmer'S Manual

Page: 150 / 455

Commands Listed in Alphabetical Order
Examples
DISPLAY:MEASREADOUT 1
enables the Measurement readout display.
DISPLAY:MEASREADOUT?
might return
DISPLAY:MEASREADOUT 0
, indicating
that the Measurement readout display is off.
NOTE.
A query always returns a 0 or 1.
DISplay:PERSistence
This command sets or queries the length of time that data points are displayed
when variable persistence is active. This affects the display only and is equivalent
to setting Time in the Style section of the Display Setup dialog box.
Group
Display Control
Syntax
DISplay:PERSistence <NR3>
DISplay:PERSistence?
Related Commands DISplay:STYle
Arguments
NR3
speci fi es the length, in seconds, that the waveform points are displayed on the
screen. The range is 200 ms to 10 s (in increments of 100 ms from 200 ms to 1s,
and in 0.5 s increments from 1 s to 10 s).
Examples
DISPLAY:PERSISTENCE 3
speci fi es that the waveform points are displayed on
the screen for 3 seconds before they fade.
DISPLAY:PERSISTENCE?
might return
DISPLAY:PERSISTENCE
0.200000000000
, indicating that the persistence is set to 200 ms.
DISplay:SHOWVector
This command sets or queries the Show Vectors mode. For the Normal display
style only, you can set the instrument to draw vectors between displayed waveform
points. This is equivalent to selecting or clearing the Show Vectors check box in
the Style section of the Display Setup dialog box.
Group Display Control
Syntax
DISplay:SHOWVector { ON | OFF | NR1 }
DISplay:SHOWVector?
2-134 DSA8300 Programmer Manual