Tektronix DSA8300, Programmer'S Manual

Page: 147 / 455

Commands Listed in Alphabetical Order
Group Display Control
Syntax
DISplay:HISTReadout { ON | OFF | NR1 }
DISplay:HISTReadout?
Arguments
ON
enables the readout display for the Histogram function.
OFF
disables the readout display for the Histogram function.
NR1
set to 0 disables the Histogram readout display; any other integer enables
the Histogram readout display.
Examples
DISPLAY:HISTREADOUT 1
enables the Histogram readout display.
DISPLAY:HISTREADOUT?
might return
DISPLAY:HISTREADOUT 0
, indicating
that the Histogram readout display is off.
NOTE.
A query always returns a 0 or 1.
DISplay:INTERPolat
This command sets or queries the interpolation algorithm used to display any
waveforms in the Main or Mag views when the record length is less than 1000
points. This is equivalent to setting Interpolation in the Style section of the
Display Setup dialog box.
NOTE.
Interpolation is a display function only; the instrument does not do
acquisition interpolation.
With interpolation, the instrument increases the sample density on the waveforms
it displays by calculating intermediate points for those sampled. You can set
interpolation display algorithms to None, Linear, or Sin (x)/x.
Group Display Control
Syntax
DISplay:INTERPolat { LINear | NONe | SINX }
DISplay:INTERPolat?
Related Commands DISplay:STYle
DSA8300 Programmer Manual 2-131