Tektronix DSA8300, Programmer'S Manual

Page: 332 / 455

Commands Listed in Alphabetical Order
TDR:REF10Mhz
This command sets or returns the source (internal or external) for the TDR 10
MHz reference frequency used when the trigger source is set to TDR.
Group TDR
Syntax
TDR:REF10Mhz {LOCKExt | LOCKInt}
TDR:REF10Mhz?
Related Commands TDR:EXT10MHZref:FREQ
Arguments
LOCKExt
locks the TDR timebase to an external 10 MHz reference signal.
LOCKInt
locks the TDR timebase to the internal 10 MHz reference signal.
Examples
TDR:REF10MHZ LOCKInt
sets the instrument to use the internal timebase.
TDR:REF10MHZ?
might return
LOCKInt
, indicating the instrument is locked to
the internal timebase.
TIMe
This command sets or queries the time that the instrument can display.
Group Miscellaneous
Syntax
TIMe <QString>
TIMe?
Related Commands DATE
Arguments
QSTRING
is time in the form "hh:mm:ss".
hh is the hour number from 1 to 24.
mm is the minute number in the hour from 0 to 59.
ss is the seconds number in the minute from 0 to 59.
NOTE. There must be a colon between the hh and mm, and between the mm and ss.
2-316 DSA8300 Programmer Manual