Tektronix DSA8300, Programmer'S Manual

Page: 316 / 455

Commands Listed in Alphabetical Order
SYSTem:PROPerties:CH<x>:PRObe:DYNamic? (Query Only)
This query only command returns the lower (minimum) and upper (maximum)
output signal dynamic limits of a probe attached to the channel speci
fi ed by x,
which can be 1 through 8. The actual input dynamic range of the probe (and
channel) can be calculated by dividing the dynamic range limits of the probe by
the scale factor of the probe.
Group System
Syntax
SYSTem:PROPerties:CH<x>:PRObe:DYNamic?
Related Commands SYSTem:PROPerties:CH<x>:PRObe:SCAle?
Examples
SYSTEM:PROPERTIES:CH3:PROBE:DYNAMIC?
might
return
SYSTEM:PROPERTIES:CH3:PROBE DYNAMIC
–4.00000000000E–001,4.00000000000E–001
, indicating that the output
dynamic range of the probe attached to Channel 3 is -4.0 to +4.0 (with the
applicable unit of measure determined by the type of probe and sampling module
for the channel).
SYSTem:PROPerties:CH<x>:PRObe:IMPedance? (Query Only)
This query only command returns the characteristic input impedance of a probe
attached to the channel speci
fi ed by x, which can be 1 through 8.
Group System
Syntax
SYSTem:PROPerties:CH<x>:PRObe:IMPedance?
Examples
SYSTEM:PROPERTIES:CH1:PROBE:IMPEDANCE?
might return
SYSTEM:PROPERTIES:CH1:PROBE IMPEDANCE 1.00000005
,
indicating that the characteristic input impedance of the probe attached to Channel
1 is 100 k
Ω .
SYSTem:PROPerties:CH<x>:PRObe:MODElnum? (Query Only)
This query only command returns the model number of the probe attached to the
channel speci
fi ed by x, which can be 1 through 8.
2-300 DSA8300 Programmer Manual