Tektronix DSA8300, Programmer'S Manual

Page: 152 / 455

Commands Listed in Alphabetical Order
DISPLAY:STYLE?
might return
DISPLAY:STYLE VARPERSIST
, indicating that
the display style is set to variable persistence.
DISplay:WFMReadout
This command sets or queries state of the Waveform readout. This is equivalent to
checking or clearing the Waveform readout item in the readout selection menu.
Group
Display Control
Syntax
DISplay:WFMReadout { ON | OFF | NR1 }
DISplay:WFMReadout?
Arguments
ON
enables the readout display for the Waveform function.
OFF
disables the readout display for the Waveform function.
NR1
set to 0 disables the Waveform readout display; any other integer enables
the Waveform readout display.
Examples
DISPLAY:WFMREADOUT 1
enables the Waveform readout display.
DISPLAY:WFMREADOUT?
might return
DISPLAY:WFMREADOUT 0
, indicating that
the Waveform readout display is off.
NOTE.
A query always returns a 0 or 1.
*ESE
This command sets or queries the bits in the Event Status Enable Register (ESER).
The ESER prevents events from being reported to the Status Byte Register (SBR).
For a more detailed discussion of the use of these registers, see Registers.
Group Status and Error
Syntax
*ESE <NR1>
*ESE?
Related Commands *CLS
DESE
2-136 DSA8300 Programmer Manual