Tektronix DSA8300, Programmer'S Manual

Page: 220 / 455

Commands Listed in Alphabetical Order
Examples
LOCK ALL
locks the front-panel controls and the touchscreen.
LOCK?
might return
LOCK NONE
when the front-panel controls and touchscreen
are enabled by this command.
*LRN? (Query Only)
This query only command returns a string listing the instrument settings, except
for con
fi guration information for the calibration values. You can use this string to
return the instrument to the state it was in when you made the *LRN? query. This
command is identical to the SET? query.
Group Miscellaneous
Syntax
*LRN?
NOTE.
The *LRN? query always returns a string including command headers,
regardless of the setting of the HEADer command. This is because the returned
string is intended to be sent back to the instrument as a command string. The
VERBose command can still be used normally to specify whether the returned
headers should be abbreviated.
Related Commands HEADer
SET?
VERBose
Examples
*LRN?
might return
ACQUIRE:STATE 1;MODE SAMPLE; NUMENV
10;NUMAVG 16; REPET 1; STOPAFTER RUNSTOP; :DIAG:LOOP:OPTION
ONCE; COUNT 1; :DIAG:STATE HALT; :HEADER 1;:VERBOSE 1;
CURSOR:FUNCTION OFF; VBARS:UNITS SECONDS; POSITION1 1.00E–6;
POSITION2 9.00E–6; SELECT CURSOR1
.
MASK? (Query Only)
This query only command returns the status of all settable mask parameters.
Group
Mask
Syntax
MASK?
2-204 DSA8300 Programmer Manual