Tektronix DSA8300, Programmer'S Manual

Page: 368 / 455

Commands Listed in Alphabetical Order
source signal must pass to generate a trigger event. This command is equivalent
to clicking Set to 50% in the Level section of the Trigger Setup dialog box or
pressing the Trigger Set to 50% button on the front panel.
Group Trigger
Syntax
TRIGger:SETLevel
Related Commands TRIGger:SOUrce
TRIGger:LEVel
Examples
TRIGGER:SETLEVEL
sets the trigger level to 50% of the applied signal.
TRIGger:SLOpe
This command sets or queries the trigger slope. The slope is applied only when
trigger source is set to External Direct (see the
TRIGger:SOUrce command). For
Clock, TDR, and Free Run trigger sources, the slope is set internally to rising.
Sending this command is equivalent to selecting the rising or falling icon in the
Slope section of the Trigger Setup dialog box.
Group Trigger
Syntax
TRIGger:SLOpe {RISe | FALL}
TRIGger:SLOpe?
Related Commands TRIGger:SOUrce
Arguments
RISe
causes the instrument to trigger on the rising slope of the trigger source
signal.
FALL
causes the instrument to trigger on the falling slope of the trigger source
signal.
Examples
TRIGGER:SLOPE FALL
causes the instrument to trigger on the falling slope of
the trigger source signal when the trigger source is set to External Direct.
TRIGGER:SLOPE?
might return
TRIGGER:SLOPE RISE
, indicating that the
instrument is set to trigger on the rising slope of the trigger source signal.
2-352 DSA8300 Programmer Manual