Tektronix DSA8300, Programmer'S Manual

Page: 315 / 455

Commands Listed in Alphabetical Order
input nondestruct range for Channel 3 is from –3.0 to +3.0 (with the applicable
unit of measure determined by the type of sampling module for the channel).
SYSTem:PROPerties:CH<x>:OPERating? (Query Only)
This query only command returns the lower (minimum) and upper (maximum)
absolute input signal operating limits of the sampling module channel speci
fi ed by
x, which can be 1 through 8.
Group System
Syntax
SYSTem:PROPerties:CH<x>:OPERating?
Examples
SYSTEM:PROPERTIES:CH5:OPERATING?
might return
SYSTEM:PROPERTIES:CH5:OPERATING –1.600000000,
1.600000000
, indicating that the absolute input operating range for
CH5 is from –1.6 to +1.6 (with the applicable unit of measure determined by the
type of sampling module for the channel).
SYSTem:PROPerties:CH<x>:PRAnge? (Query Only)
Like the PHAseref:CH<x>:RANge? query, this query returns the guaranteed
frequency range of the Phase Reference Module corresponding to CH<x>,
but it returns the range as part of the system-properties query results. See the
PHAseref:CH<x>:RANge? query for more information.
Group System
Syntax
SYSTem:PROPerties:CH<x>:PRAnge?
Related Commands
PHAseref:CH<x>:RANge?
PHAseref:CH<x>:STAtus?
Examples
SYSTEM:PROPERTIES:CH2:PRANGE?
might return
8.000GHZ-60.00GHZ
for an
82A04B or 82A04 module installed in the CH1/CH2 small-module compartment.
DSA8300 Programmer Manual 2-299