Tektronix DSA8300, Programmer'S Manual

Page: 247 / 455

Commands Listed in Alphabetical Order
:MEASUREMENT:MEAS1:SOURCE1:WFM CH3, MAIN;WFMDB:STATE
0;SIGTYPE PULSE;:MEASUREMENT:MEAS1 SOURCE1:GATE1:POS
1.80000000000E-008;
...
MEASUrement:ALL:VALue? (No Query Form)
This query only command returns all the measurement values.
Group Measurement
Syntax
MEASUrement:ALL:VALue?
Related Commands MEASUrement:LISTValue?
MEASUrement:MEAS<x>:VALue?
Examples
MEASUREMENT:ALL:VALUE?
might return
MEASUREMENT:ALL:VALUE
5.18798842266E-004, 1.08967389191E-010,99.1000036,
1.57041666667E-009,6.367736008,
99.1000036,4.11368599818E-001", 99.1000036
as
the listing of the eight possible measurement values.
NOTE.
The value 99.1000036 in the returned list of values is the
numeric equivalent to NAN (not a number); this value indicates that the
measurement slot does not have a valid measurement de
fi ned for it.
MEASUrement:ANNOtations:STATE
This command sets or queries whether annotations are displayed. This is
equivalent to toggling the Annotations check box in the Measurement Setup
dialog box. To display gates used in gated measurements, Gates must be enabled
with the MEASUrement:MEAS<x>:GATing:STATE command.
Group Measurement
Syntax
MEASUrement:ANNOtations:STATE { ON | OFF | NR1 }
MEASUrement:ANNOtations:STATE?
Related Commands MEASUrement:MEAS<x>:GATing:STATE
DSA8300 Programmer Manual 2-231