Tektronix DSA8300, Programmer'S Manual

Page: 290 / 455

Commands Listed in Alphabetical Order
82A04B-60G Phase Reference Module installed in the CH1/CH2 small module
compartment.
This same command will result in a coerced clock frequency of 25 GHz for
82A04 modules (32 GHz for 82A04B modules) that are not equipped with
Option 60G. With the connected clock at 45 GHz, turning phase correction on
and performing a characterization results in an error, since the coerced setting
mismatches the connected clock by more than 10%.
PHAseref:CH<x>:RANge? (Query Only)
This command queries and returns the guaranteed frequency range of the Phase
Reference Module corresponding to CH<x>, where <x> is a channel associated
with the compartment in which the Phase Ref Module is installed. You can use
either of the two channels associated with the compartment. For example, if the
module is installed in the CH 7/CH8 compartment, x can be 7 or 8.
Item 82A04
82A04 Opt.
60G
82A04B
82A04B Opt.
60G
Guaranteed
range 8E+09 to
25E+09 8E+09 to
60E+09 8E+09 to
32E+09 8E+09 to
60E+09
Allowed range 2E+09 to
25E+09 2E+09 to
110E+09 2E+09 to
32E+09 2E+09 to
110E+09
NOTE.
The allowed range of values that is accepted is larger than the guaranteed
range that's supported. See the PHAseref:CH<x>:FREQuency command for
more information.
Group
Phase Reference
Syntax
PHAseref:CH<x>:RANge?
Related Commands
PHAseref:CH<x>:FREQuency
PHAseref:CHAR
PHAseref:MODe
PHAseref:SOUrce
PHAseref:CH<x>:STAtus?
2-274 DSA8300 Programmer Manual