Tektronix DSA8300, Programmer'S Manual

Page: 276 / 455

Commands Listed in Alphabetical Order
Syntax
MEASUrement:MEAS<x>:SOUrce<x>:WFMDB:STATE { ON | OFF | NR1 }
MEASUrement:MEAS<x>:SOUrce<x>:WFMDB:STATE?
Related Commands MEASUrement:MEAS<x>:SOUrce<x>:WFMDB:SIGType
Arguments
ON
enables the database measurement for the speci fi ed source waveform so
that the measurement is made on the database.
OFF
disables the database measurement so that the measurement is taken
directly on the acquired waveform.
NR1
set to 0 disables the database measurement; any other value enables the
database measurement.
Examples
MEASUREMENT:MEAS5:SOURCE1:WFMDB:STATE ON
causes Measurement 5 to
be taken on the Source 1 waveform database.
MEASUREMENT:MEAS<X>:SOURCE<X>:WFMDB:STATE?
might return
MEASUREMENT:MEAS2:SOURCE1:WFMDB:STATE 0
, indicating that
Measurement 2 will be taken on the Source 1 waveform.
NOTE. A query always returns a 0 or 1.
MEASUrement:MEAS<x>:STATE
This command sets or queries whether the speci fi ed measurement slot is computed
and displayed. The measurement slot is speci fi ed by x, which can be 1 through
8. Sending this command is equivalent to selecting a measurement slot (such as
Meas 3) and checking the On box in the Measurement Setup dialog box.
For a measurement to display, you must have selected a source waveform and
de
fi ned the measurement you want take and display. You select the measurement
source with the MEASUrement:MEAS<x>:SOURCE<x>:WFM command.
You de
fi ne the measurement type with the MEASUrement:MEAS<x>:TYPe
command.
Group Measurement
Syntax
MEASUrement:MEAS<x>:STATE {OFF | ON | <NR1>}
MEASUrement:MEAS<x>:STATE?
Related Commands MEASUrement:MEAS<x>:SOUrce<x>:WFM
MEASUrement:MEAS<x>:TYPe
2-260 DSA8300 Programmer Manual