Tektronix DSA8300, Programmer'S Manual

Page: 86 / 455

Commands Listed in Alphabetical Order
Examples
AUTOSET:TRIGGER ON
enables the trigger autoset options.
AUTOSET:TRIGGER?
might return
AUTOSET:TRIGGER 0
, indicating that trigger
autoset options are disabled.
NOTE.
A query always returns a 0 or 1.
AUTOSet:TYPE
This command sets or queries the default mode used by the AUTOSet command to
perform nonmask and nonTDR AUTOSet operations. Using the TYPE argument,
you can bias the autoset operation for display of either a waveform edge, period,
eye, or TDR edge in the graticule. Sending this command is equivalent to
selecting a mode in the Autoset Properties dialog box.
NOTE.
When performing MASK:AUTOSet operations, the currently pre-de fi ned
mask standard (selected with the MASK:STANDARD command) drives Autoset
execution, not the AUTOSET:TYPE command setting. However, when using a
user-de
fi ned mask, you still might want to use the AUTOSet and AUTOSet:TYPE
command, since the MASK:AUTOSET command is unable to obtain autoset
parameters from a user-de
fi ned mask standard.
Group
Miscellaneous
Syntax
AUTOSet:TYPE { EDGe | PERIod | EYE | RZ | TDR }
AUTOSet:TYPE?
Related Commands AUTOSet
AUTOSet:TDR:INCident
AUTOSet:VERTical
AUTOSet:TRIGger
AUTOSet:HORizontal
2-70 DSA8300 Programmer Manual