Specification—475
POSITION Control Range
A t least +12 and —12 divisions from graticule center.
Signal Delay Between Channel 1 and Channel 2
±0.25 nanosecond at 5 m V /D IV .
Input R and C Time Constant
Aberrations should be 2% or less using a one megohm,
20 picofarad input time-constant normalizer.
T R IG G E R IN G
External Trigger Input Capacitance
Twenty picofarads within 30%.
TRIG V IE W Deflection Factor
50 mV/div ±20%. Exclude LF REJ and HF REJ trigger
coupling modes.
TRIG V IEW Risetime
< 3 .5 nanoseconds over the 10% to 90% part of the fast
rise portion.
TR IG V IEW Delay Difference
< 2
nanosconds
with
5 division signal having
1
nanosecond or less risetime from 25 ohm source, centered
vertically with equal cable length from signal source to
vertical channel and external trigger inputs, each terminated
in 50 ohms.
TRIG V IEW Centering of Trigger Point
Adjustable to within one division of center screen.
H O R IZO N TA L D EFLEC TIO N SYSTEM
Sweep Accuracy
Exclude the first 25 nanoseconds or 2 divisions
(whichever is greater) and all beyond the 100th division of
the sweep when checking 1 ns through 500 ns/division
magnified sweep rates.
Mixed Sweep Accuracy
Exclude the first 0.5 division after the display start, and
the first 0.2 division or 0.1 microsecond (whichever is
greater) after the transition of A to B.
Differential Time Measurement Accuracy
Exclude D E L A Y T IM E POSITION dial settings of 0.00
through 0.50 for 0.5 second through 1.0 microsecond/
division delaying sweep rates.
Exclude D E L A Y T IM E POSITION dial settings of 0.00
through
1.00
for
0.5
microsecond
through
0.05
microsecond/division delaying sweep rates.
Sweep Length (A Only)
A t least 10.1 divisions.
Magnifier Registration
Within
0.5
division
from
graticule
center
at
1
millisecond/division.
POSITION Control Range
Start of sweep must position to right of graticule center.
End of sweep must position to left of graticule center.
Check made at 1 millisecond/Division sweep rate.
Phase Difference between X and Y Axes Amplifiers
Within 1° from DC to 1 megahertz. Within 3° from 1
megahertz to 2 megahertz.
X Axis Low Frequency Linearity
0.2 division or less compression or expansion of a 2
division signal (at center screen) positioned to both
horizontal extremes of the display area.
CALIB R A TO R
Repetition Rate
Repetition Rate accuracy is typically within 25%.
Output Resistance
Approximately 9.4 ohms.
E XTER N A L Z A X IS INPUT
Maximum Input Voltage
Voltages applied to the E X T Z A X IS IN PUT connector
should be limited to less than 100 volts DC plus peak AC or
100 volts peak to peak AC at 1 kilohertz or less.
1-5
Summary of Contents for 475
