1
IV0620C Operation Manual
Intended use
This instrument is intended for inspecting and observing the interior of machinery, equipment,
materials, and other objects, without damaging the object being inspected.
Setting up the IV0620C
This product can be set up easily for inspection to be performed immediately.
Simply follow the four steps below to complete the setup.
1. Remove components from the case
Remove the components in the following
sequence: insertion unit
→
main unit.
2. Preparing the power supply
•
Using battery: Check to ensure that the battery is charged, followed by setting it to the main unit.
A
Push down the battery door lock to open the battery door.
B
Load the battery according to the direction indicated on the battery terminal while paying
attention to the orientation of the battery.
C
Press the battery from above until a “click” sound is heard. After the battery is correctly loaded,
close the battery door.
Before handling this product, please read through and follow the instructions and
precautions in the instruction manual of the IV0620C.
This operation manual is an excerpt from the descriptions and instructions in the instruction
manual of the IV0620C, which include the setup procedures during the use of the product,
the functions of the basic operating components, descriptions on the indicator and menu
displays, and safety precautions.
Industrial Endoscope
Insertion Unit
Main Unit
