71
98-05304-EN R2
Aeros 9040 field computer
HOME
SE
TUP
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
GUID
ANCE
Guidelines
Mark A – marks the first point of the
guideline.
Mark B – marks the end point of the
guideline. Greyed = minimum distance has not
been travelled.
Cancel mark A – cancels the Mark A process.
Reverts to previous AB guideline (when
established).
NextRow mark B – marks the end point of
the row.
Azimuth degree – establishes a straight
guideline measured by degrees clockwise from
a north-south baseline. North = 0, East = 90,
South = 180, West = 270.
A+ nudge – shifts the existing guideline to the
vehicle’s current position.
Next straight guideline – shows the next
straight AB or Azimuth degree guideline saved
in the current job.
Next curved AB guideline – shows the next
Curved AB guideline saved in the current job.
Next circle pivot guideline – shows the next
Circle pivot AB guideline saved in the current job.
Next adaptive curve guideline – shows the
next Adaptive Curve AB guideline saved in the
current job.
Return to Point
Mark point – establishes a point at
the vehicle location. Greyed = GNSS is
unavailable.
Return to point guidance – provides distance
and guidance back to an established point.
Delete point – deletes the Marked Point.
Cancel guidance – hides the distance and
guidance back to the marked point.
Nozzle fault reset
Clears any nozzle fault indications.
Refresh GNSS position
Resets the ClearPath filter in the OEMStar
receiver.
Boundary and polygon options
On any guidance screen, displays exterior boundary, interior
boundary and polygon options.
12
deg
-13
0.0
3.5
(bar)
Exterior boundaries
Mark exterior boundary – establishes
application area and determines no-apply
zones. While creating an exterior boundary, the
boundary line will be to the exterior of the outer-
most section. Greyed = GNSS is unavailable.
Cancel exterior boundary – cancels mark
exterior boundary process
Finish exterior boundary – finalizes current
mark exterior boundary process. Boundaries
can also be closed by travelling to within a
swath width of the starting point.
Pause exterior boundary – pauses the mark
exterior boundary process
Resume exterior boundary – resumes the mark
exterior boundary process
Delete last marked boundary – deletes the last
marked boundary (interior or exterior) from the
current job. Press again to remove additional
boundaries in order from last to first created
Interior boundaries
Mark interior boundary – establishes application
area and determines no-apply zones. While
creating an interior boundary, the boundary line
will be to the interior of the inner-most section.
Greyed = GNSS is unavailable.
Cancel interior boundary – cancels current
mark interior boundary process
Finish interior boundary – finalizes current mark
interior boundary process. Boundaries can also
be closed by travelling to within a swath width
of the starting point
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
