74
www.teejet.com
Aeros 9040 field computer
HOME
SE
TUP
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
GUID
ANCE
GUIDANCE BAR
The Guidance bar keeps you informed of your choice of selectable information, navigation activity, and section status.
Navigation activity & Boom status
GNSS status – displays “No GNSS” when GNSS is unavailable, or
“Slow GNSS” when GNSS is receiving GGA data at less than 5Hz
Cross track error – displays the distance from your desired guideline
Current activity – displays activities such as mark an A or B point,
approaching the end of a row, indicating to turn now, and distance to
return to a marked point
Section status – one dot is displayed for each section programmed:
a green dot indicates the section is active, and a red dot indicates
the section is not active
Figure 7-3: Navigation activity/section status
10.0
km/h
27.00
ha
Mark A
Metres [1.5]
Centimetres [150]
Metres [1.50]
Cross track error
The distance around the guideline that is perceived as zero error can
be adjusted using Configuration-> Guidance-> Guidance sensitivity.
To change the format in which the distance is displayed:
1. Press the Navigation activity box on the guidance bar.
2. Select the measurement format.
Selectable Information
Speed – displays the current speed of travel
Heading – displays the course of travel based clockwise from a true
north baseline. North = 0°, East = 90°, South = 180°, West = 270°.
Total applied area – displays the total accumulated area that has had
product applied, including double-coverage areas
Application time – displays the total time application is active during
the current job
Time – displays the current time based on the selected time zone
Swath number – displays the current swath number in reference to
the initial AB guidance line, facing in the direction from A to B. Number
will be positive when the vehicle is to the right of the AB baseline, or
negative when the vehicle is to the left of the AB baseline.
System pressure – displays the current system pressure (available
only when an Input/Output Module is on the system)
Droplet size – displays the current nozzle droplet size (available only
when an Input/Output Module is on the system)
Actual application rate – displays the current application rate
(available only when a rate controller is on the system)
Target application rate – displays the target application rate
(available only when a rate controller is on the system)
Volume/product applied – displays the volume or weight of product
applied (available only when a rate controller is on the system)
Tank/bin amount remaining – displays the volume or weight of
product remaining in the tank/bin (available only when a rate
controller is on the system)
Figure 7-4: Selectable information
10.0
km/h
27.00
ha
Mark A
Speed
Total applied area
Time
System pressure
Actual
application rate
Droplet Size
Target
application rate
Heading
Application time
Swath number
Volume/product
applied
Tank/bin amount
remaining
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
