9
98-05304-EN R2
Aeros 9040 field computer
HOME
SE
TUP
GUID
ANCE
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
FULL SCREEN
CHAPTER 3 – FULL SCREEN VIDEO VIEW
RealView full screen video view allows live video input to be displayed. View video feed(s) and setup cameras without GNSS available.
Options for RealView guidance are not available on this screen.
►Single camera – a single camera is directly attached to the console
►Video selection module – if a Video Selection Module (VSM) is installed on the system, two (2) video options are available:
• One camera view – one of up to eight camera inputs can be selected to change the view of the video input.
• Split camera view – one of two sets of four camera inputs (A/B/C/D or E/F/G/H) can be selected to divide the screen into four
separate video feeds.
To adjust the camera view [reverse, upside down], go to Setup-> Configuration-> Video.
To enter Full screen video mode:
1. Press REALVIEW CAMERA FULL SCREEN VIDEO VIEW bottom tab
.
2. Press REALVIEW OPTIONS tab
to display RealView options.
3. Select from:
►Single camera view
[VSM only] – one (1) of up to eight (8) camera inputs can be selected to change the view of the video input
►Split camera view
[VSM only] – one (1) of two (2) sets of four (4) camera inputs (A/B/C/D or E/F/G/H) can be selected to divide the
screen into four separate video feeds
►RealView camera image capture
– saves a still photo of the current view on the screen to a USB drive
Figure 3-1: RealView full screen video view
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
