TeeJet Technologies AEROS 9040, User Manual

Page: 72 / 126

64
www.teejet.com
Aeros 9040 field computer
HOME
SE
TUP
GUID
ANCE
FULL SCREEN
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
IMPLEMENT
REVERSE SENSE
Reverse sense options are used when adding a Reverse sense
module, SCM (Steering Control Module for FieldPilot IV) or SCM Pro
(Steering Control Module Pro for FieldPilot Pro/UniPilot Pro) to any
configuration. This allows for application mapping and control, and
on-screen guidance when traveling in reverse.
1. Press CONFIGURATION side tab
.
2. Press
Implement
.
3. In addition to standard options, select from:
►Allow BoomPilot in reverse – used to enable BoomPilot
function while traveling in reverse
►Reverse signal delay – used to set the delay when going
from forward to reverse or reverse to forward, after which the
vehicle icon on a navigation screen changes direction
Figure 6-38: Reverse sense module
Reverse on guidance screens
While traveling in reverse, having BoomPilot in reverse active allows
for product application, automatic section control, and mapping that
is correct for reverse machine movement
◄Speed on the Guidance bar will turn red while traveling in
reverse
Figure 6-39: Traveling forward
13:14 7.2
km/h
0.0
Figure 6-40: Traveling in reverse
13:18 5.6
km/h
0.0
Availability with different system configurations
Automatic Section
Control device on
system
Device sensing
reverse vehicle
movement
BoomPilot in
reverse feature
available
BoomPilot in reverse can be
turned on/off in menu using
Allow BoomPilot in reverse
Signal delay can be adjusted
using
Reverse signal delay
SDM or SFM
FieldPilot IV *
  
Reverse Sense Module
  
FieldPilot Pro / UniPilot Pro
  
**
IC18 Sprayer
or IC34 Sprayer
FieldPilot IV *

***
 
Reverse Sense Module

***
 
FieldPilot Pro / UniPilot Pro

***
 
**
* Optional function that is hardware dependent.
** Controlled directly by the FieldPilot Pro / UniPilot Pro.
*** Aeros consoles shipped from factory have the “Spray in Reverse” disabled by default. For TeeJet ISOBUS Implement ECU’s, a USB Drive based settings app is
required to change this to enabled, allowing to spray when in reverse.