90
www.teejet.com
Aeros 9040 field computer
HOME
SE
TUP
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
GUID
ANCE
With TeeJet section control module and
switchbox or ISM
SmartCable, Section driver module (SDM) or Switch function module
(SFM) and a switchbox or Implement status module (ISM) is present.
NOTE: The BOOMPILOT icon is grey
when GNSS is unavailable.
BoomPilot status bar icon will be off/manual .
To switch application off or on automatically:
1. Automatic/manual boom switch must be in the “Auto” position.
◄Automatic – status bar icon will be green
2. Master switch and section switches must be in the “On” position.
NOTE: Application can be manually controlled while in Automatic
BoomPilot mode using the switches on the switchbox or
switches connected to the ISO ISM.
To switch application off or on manually:
1. Automatic/manual boom switch must be in the “Manual” position.
◄Manual – status bar icon will be red
2. Use the switches on the switchbox or switches connected to the
ISO ISM.
With TeeJet section control module
SmartCable, Section driver module (SDM) or Switch function module
(SFM) is present BoomPilot is used to set automatic section control
to off/manual , automatic , or spot application
NOTE: The BOOMPILOT icon is grey
when GNSS is unavailable.
BoomPilot status bar icon will be off/manual .
To switch application off or on automatically:
1. Press NAVIGATION AND GUIDANCE OPTIONS tab
to
display navigation options.
2. Press and release BOOMPILOT icon .
◄Enable – status bar icon will change to green
◄Disable – status bar icon will change to red
To apply a spot application:
1. Press NAVIGATION AND GUIDANCE OPTIONS tab
to
display navigation options.
2. Press and hold BOOMPILOT icon over area to be applied.
◄Spot application– status bar icon will change to yellow
CURVED LOOKAHEAD
The curved lookahead guideline provides an indication of where the
current steering will take the vehicle using a ‘pointer’ as guidance.
The Curved lookahead option is available in all guidance modes.
To activate the Curved lookahead guideline:
1. Press NAVIGATION AND GUIDANCE OPTIONS tab
to
display navigation options.
2. Select CURVED LOOKAHEAD icon
.
The pointer will be visible on the navigation screen.
Figure 7-32: Curved lookahead
-13
7.2
km/h
Mark A
To remove the Curved lookahead guideline:
1. Press NAVIGATION AND GUIDANCE OPTIONS tab
to
display navigation options.
2. Select CURVED LOOKAHEAD icon .
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
